General Description
Cupric chloride and ammonia contains various concentrations of cupric chloride in ammonium hydroxide. This forms a copper ammonia complex. CUPRIC CHLORIDE SOLUTION, [AMMONIATED] is corrosive to skin, eyes, mucous membranes and metal. This material is used to etch copper from printed circuit boards.
Reactivity Profile
CUPRIC CHLORIDE has weak oxidizing or reducing powers. Redox reactions can however still occur. The majority of compounds in this class are slightly soluble or insoluble in water. If soluble in water, then the solutions are usually neither strongly acidic nor strongly basic. These compounds are not water-reactive.
Health Hazard
TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Fire Hazard
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.
First aid
Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim warm and quiet. Effects of exposure (inhalation, ingestion, or skin contact) to substance may be delayed. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Medical observation is recommended for 24 to 48 hours after breathing overexposure, as pulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consider administering a drug or other inhalation therapy.
Shipping
UN2802 Copper chloride, Hazard class: 8; Labels: 8-Corrosive material.
Incompatibilities
Contact with strong acids forms monovalent copper salts and toxic hydrogen chloride gas. Forms shock-sensitive and explosive compounds with potassium, sodium, sodium hypobromite, nitromethane, acetylene. Keep away from moisture and alkali metals. Attacks metals in the presence of moisture. Reacts with moist air to form cupric chloride dihydrate. May attack some metals, paints, and coatings. May be able to ignite combustible materials.
Description
Copper chloride is a brownish-yellow powder.Molecular weight =134.44. Boiling point =993℃ (decomposes below this point); Freezing/Melting point =498℃.Hazard Identification (based on NFPA-704 M RatingSystem): Health 2, Flammability 0, Reactivity 0. Soluble inwater.
Chemical Properties
Cupric Chloride, brown-yellow powder, quite soluble in cold H2O or alcohol, very soluble in hot H2O. Catalyst for several organic syntheses, including production of vinyl chloride monomer.
Chemical Properties
Cupric chloride, CuCI2, also known as copper chloride, is a yellowish- brown solid that is soluble in water and alcohol. The dihydrate of cupric chloride, CUCI2·H20, is a green crystalline solid that is soluble in water. Cupric chloride is used in the textile industry as a mordant in the dyeing and printing of fabrics. Itis also used in refining gold,silver,and copper.
Definition
ChEBI: An inorganic chloride of copper in which the metal is in the +2 oxidation state.
Potential Exposure
Copper chloride is used in petroleum,textiles, metallurgy, photography, agricultural products,feed additives, and wood preservation. It is also used inlight-sensitive paper manufacturing, glass pigments, ceramics, and in making cyclonitrile.
storage
Color Code—White: Corrosive or Contact Hazard;Store separately in a corrosion-resistant location. Prior toworking with this chemical you should be trained on itsproper handling and storage. Store in tightly closed containers in a cool, well-ventilated area away from incompatiblematerials listed above, moisture, and heat.
Purification Methods
Crystallise the chloride from hot dilute aqueous HCl (0.6mL/g) by cooling in a CaCl2-ice bath. It is dehydrated by heating on a steambath under vacuum. It is deliquescent in moist air but efflorescent in dry air. The dihydrate is emerald green but blue when free from solvent. Concentrated solutions are yellow-green in colour but are blue when free from solvent. Concentrated solutions are yellow-green and become yellow on adding conc HCl. A very dilute solution is pure blue due to Cu(H2O)42+ [Donan & Bassett J Chem Soc 81 939 1902.]. CuCl2 is very deliquescent and is soluble in MeOH or EtOH to give green crystals of Cu(ROH)2Cl2. [Glemser & Sauer in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol II p 1008 1965.]
