General Description
A clear colorless liquid. Flash point 70°F. Less dense than water and insoluble in water. Vapors heavier than air.
Reactivity Profile
2-ETHYLBUTYRALDEHYDE(97-96-1) is an aldehyde. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.
Air & Water Reactions
Highly flammable. With air slowly form peroxides. Insoluble in water.
Hazard
Irritant to eyes and skin. Flammable, dangerous fire risk.
Health Hazard
May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.
Potential Exposure
Used in organic synthesis of pharmaceuticals and rubber chemicals.
Fire Hazard
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
First aid
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids. Seek
medical attention immediately. If this chemical contacts the
skin, remove contaminated clothing and wash immediately
with soap and water. Seek medical attention immediately.
If this chemical has been inhaled, remove from exposure,
begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical
facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce
vomiting. Do not make an unconscious person vomit heart action has stopped. Transfer promptly to a medical
facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce
vomiting. Do not make an unconscious person vomit
Shipping
UN1178 2-Ethyl butyraldehyde, Hazard Class: 3;
Labels: 3-Flammable liquid
Incompatibilities
Vapors may form explosive mixture with
air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep
away from alkaline materials, strong bases, strong acids,
oxoacids, epoxides, and reducing agents. Aldehydes are frequently involved in self-condensation or polymerization
reactions. These reactions are exothermic; they are often
catalyzed by acid. Aldehydes are readily oxidized to give
carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing
agents. Aldehydes can react with air to give first peroxo
acids, and ultimately carboxylic acids. These autoxidation
reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products
of the reaction). The addition of stabilizers (antioxidants) to
shipments of aldehydes retards autoxidation
Description
Ethyl butyraldehyde is a colorless liquid.Molecular weight = 100.18; Boiling point = 116.8℃;Freezing/Melting point = - 89℃; Flash point = 21℃ (oc).Explosive limits: LEL = 1.2%; UEL = 7.7%. HazardIdentification (based on NFPA-704 M Rating System):Health 2, Flammability 3, Reactivity 1. Insoluble in water.
Chemical Properties
2-Ethylbutyraldehyde has a pungent odor.
Chemical Properties
Colorless liquid.Insoluble in water.
Chemical Properties
Ethyl butyraldehyde is a colorless liquid
Waste Disposal
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal,
state, and local environmental regulations must be
observed. Consult with environmental regulatory agencies
for guidance on acceptable disposal practices. Generators
of waste containing this contaminant (≥100 kg/mo) must
conform with EPA regulations governing storage, transportation, treatment, and waste disposal.
Occurrence
Reported found in melon, French fried potato, wheaten bread, scallops, citrus fruits, white bread and maize.
Definition
ChEBI: 2-Ethylbutanal is an organooxygen compound.
Taste threshold values
Taste characteristics at 20 ppm: green, fruity, cocoa with sweet, fresh nuances.
Synthesis
From diethyl carbinol and anhydrous oxalic acid or with sulfuric acid; a more recent synthetic route (Xeisel–Neuwirth
method) calls for the reduction of α-vinylcrotonaldehyde using iron dust and acetic acid
storage
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Store intightly closed containers in a cool, well-ventilated areaaway from oxidizers. Where possible, automatically pumpliquid from drums or other storage containers to processcontainers
