- Melting point:
- Boiling point:
- 0.789 g/mL at 20 °C
- vapor density
- 1.59 (vs air)
- vapor pressure
- 43 mmHg at 20 °C
- refractive index
- 2419 | ETHYL ALCOHOL
- Flash point:
- storage temp.
- Store at RT.
- water: soluble (completely)
- 16(at 25℃)
- Liquid. Colorless liquid / invisible vapor.
- APHA: ≤10
- Specific Gravity
- Relative polarity
- 7.0 (10g/l, H2O, 20℃)
- Pleasant alcoholic odor detectable at 49 to 716 ppm (mean = 180 ppm)
- Odor Threshold
- explosive limit
- Water Solubility
- λ: 240 nm Amax: 0.40
λ: 250 nm Amax: 0.30
λ: 260 nm Amax: 0.30
λ: 270 nm Amax: 0.10
λ: 340 nm Amax: 0.10
- JECFA Number
- Exposure limits
- TLV-TWA 1900 mg/m3 (1000 ppm) (ACGIH).
- Stable. Substances to be avoided include strong oxidizing agents, peroxides, acids, acid chlorides, acid anhydrides, alkali metals, ammonia, moisture. Forms explosive mixtures with air. Hygroscopic.
- CAS DataBase Reference
- 64-17-5(CAS DataBase Reference)
- NIST Chemistry Reference
- EPA Substance Registry System
- Ethanol (64-17-5)
- Hazard Codes
- Risk Statements
- Safety Statements
- WGK Germany
- Autoignition Temperature
- 363 °C
- HS Code
- Hazardous Substances Data
- 64-17-5(Hazardous Substances Data)
- LD50 in young, old rats (g/kg): 10.6, 7.06 orally (Wiberg)
N-Bromosuccinimide Price More Price(171)
- Product number:
- Product name :
- Ethanol solution
- United States Pharmacopeia (USP) Reference Standard
- Product number:
- Product name :
- Alcohol Determination-Alcohol
- United States Pharmacopeia (USP) Reference Standard
- Product number:
- Product name :
- Ethanol, anhydrous, denatured, HPLC Grade, 90%, 5% methanol, 5% isopropanol
- Product number:
- Product name :
- Ethanol, anhydrous, denatured, Spectrophotometric Grade, 90%, 5% methanol, 5% isopropanol
- Product number:
- Product name :
- Ethyl alcohol, Pure
- 190 proof, for molecular biology
Ethanol Chemical Properties,Usage,Production
Ethanol, also known as ethyl alcohol (or grain spirits, or alcohol), is a clear colorless, volatile, flammable solvent with a characteristic odor. The boiling point of ethanal is 78.5°C. The bio-alcohol is found in alcoholic beverages. Concentrated alcohol has a strong burning taste, but it is somewhat sweet when diluted. It is also increasingly being used as a fuel (usually replacing or complementing gasoline). Its low melting point of -114.5° C allows it to be used in antifreeze products.
Ethanol has been known to humans since prehistory as the active ingredient of alcoholic beverages. Its isolation as a relatively pure compound was probably achieved first by Islamic alchemists who developed the art of distillation.
Ethanol is highly soluble in water and organic solvents, but poorly soluble in fats and oils. Ethanol itself is a good solvent, which is used in cosmetics, paints and tinctures. Density of ethanol at 68 °F (20 °C) is 789 g/l. Pure ethanol is neutral (pH ~7). Most alcoholic beverages are more or less acidic.
Ethanol/ethyl alcohol is highly flammable liquid, hygroscopic, and fully miscible in water. Ethanol is incompatible with a large number of chemicals such as strong oxidising agents, acids, alkali metals, ammonia, hydrazine, peroxides, sodium, acid anhydrides, calcium hypochlorite, chromyl chloride, nitrosyl perchlorate, bromine pentafluoride, perchloric acid, silver nitrate, mercuric nitrate, potassium tert-butoxide, magnesium perchlorate, acid chlorides, platinum, uranium hexafluoride, silver oxide, iodine heptafluoride, acetyl bromide, disulphuryl difluoride, acetyl chloride, permanganic acid, ruthenium (VIII) oxide, uranyl perchlorate, and potassium dioxide.
Ethanol is produced by fermenting and distilling grains. Actually, ethanol can be made from any plant that contains a large amount of sugar or components that can be converted into sugar, such as starch or cellulose. As their names imply, sugar beets and sugar cane contain natural sugar. Crops such as corn, wheat and barley contain starch that can be easily converted to sugar. Today, ethanol is made primarily from corn.
Another form of ethanol, called bioethanol, can be made from lignocellulosics which are from many types of trees and grasses, although the process is more difficult. Lignocellulose consists of three main components: cellulose, hemicellulose and lignin, the first two being composed of chains of sugar molecules. Those chains can be hydrolyzed to produce monomeric sugars, some of which can be fermented using yeasts to produce ethanol. Ethanol can be produced from lignocellulosic materials in various ways, but all processes comprise the same main components: hydrolysis of the hemicellulose and the cellulose to monomer sugars, fermentation and product recovery and concentration by distillation.
Currently, ethanol production processes using crops are well-established. However, utilization of a cheaper substrate, such as lignocellulose, could make bioethanol more competitive with fossil fuel. Therefore, bacterial and yeast strains have been constructed which are advantageous for ethanol production. The cost of ethanol production from lignocellulosic materials is relatively high based on current technologies, and the main challenges are the low yield and high cost of the hydrolysis process. Considerable research efforts have been made to improve the hydrolysis of lignocellulosic materials. Besides, new enzymes have revolutionized the liquefaction process in starch ethanol and improved ethanol yield and product quality.
A solution of 70-85% of ethanol is commonly used as a disinfectant and it kills organisms by denaturing their proteins and dissolving their lipids. It is effective against most bacteria and fungi, and many viruses, but is ineffective against bacterial spores. This disinfectant property of ethanol is the reason that alcoholic beverages can be stored for a long time. Ethanol also has many medical uses, and can be found in products such as medicines, medical wipes and as an antiseptic in most antibacterial hand sanitizer gels. Ethanal can also be used as antidote. It competitively blocks the formation of toxic metabolites in toxic alcohol ingestions by having a higher affinity for the enzyme Alcohol Dehydrogenase (ADH). Its chief application is in methanol and ethylene glycol ingestions. Ethanol can be administered by the oral, nasogastric or intravenous route to maintain a blood ethanol concentration of 100-150 mg/dl (22-33 mol/L).
Ethanol is flammable and burns more cleanly than many other fuels. Ethanol has been used in cars since Henry Ford designed his 1908 Model T to operate on alcohol. In Brazil and the United States, the use of ethanol from sugar cane and grain as car fuel has been promoted by government programs. The Brazilian ethanol program started as a way to reduce the reliance on oil imports, but it was soon realized that it had important environmental and social benefits. The fully combusted products of ethanol are only carbon dioxide and water. For this reason, it is environmental friendly and has been used to fuel public buses in the US. However, pure ethanol attacks certain rubber and plastic materials and cannot be used in unmodified car engines.
The alcohol-based alternative fuel that is blended with gasoline to produce a fuel with a higher octane rating and fewer harmful emissions than unblended gasoline. A mixture containing gasoline with at least 10% ethanol is known as gasohol. Specifically, gasoline with 10% ethanol content is known as E10. Another common gasohol variant is E15, which contains 15% ethanol and 85% gasoline. E15 is only appropriate for use in Flex Fuel vehicles or a very small percentage of the newest vehicles. In addition, E85 is a term used for a mixture of 15% gasoline and 85% ethanol. E85 keeps the fuel system clean because it burns cleaner than regular gas or diesel and doesn't leave behind gummy deposits. Beginning with the model year 1999, a number of vehicles in the U.S. were manufactured so as to be able to run on E85 fuel without modification. These vehicles are often labeled dual fuel or flexible fuel vehicles, since they can automatically detect the type of fuel and change the engine's behavior to compensate for the different ways that they burn in the engine cylinders.
The use of ethanol-diesel fuel blends is growing around the world, and are designed to provide renewable, cleaner burning fuel alternatives for off-road equipment, buses, semi-trucks and other vehicles that run on diesel fuel. With the addition of ethanol and other fuel additives to diesel, the characteristic black diesel smoke is eliminated and there are significant reductions in particulate matter, carbon monoxide, and nitrogen oxide emissions. It is also possible to use ethanol for cooking as a replacement for wood, charcoal, propane, or as a substitute for lighting fuels, such as kerosene.
Brazil and the United States lead the industrial production of ethanol fuel, accounting together for 89% of the world's production in 2008. In comparison with the USA and Brazil, Europe ethanol for fuel production is still very modest. Brazil is the world's second largest producer of ethanol fuel and the world's largest exporter.
Significant volumes of ethanol are produced for the beverage and industrial markets from agricultural feedstock. Ethanol produced for these industries differs from ethanol for fuel only in its strength, which can vary between 96% and 99.9% and in its purity, depending on the end use. Beverage and drinks industry may be the best-known end-user of ethanol. It is used to make many kinds of spirits, such vodka, gin and anisette. High standards and processes are required for ethanal used in the production of spirit drinks.
The ethanol used as an intermediary product by the chemical, pharmaceutical or cosmetics industry is in many cases of the highest and purest possible quality. These are premium markets due to the additional steps in the alcohol production process that are necessary to achieve the required purity. Same high standards and purity requirements apply in food industry, such as flavors and aromas extraction and concentrations, as well as paints and thermometers. Ethanol can be used in de-icer or anti-freeze to clear the car windscreen. It also is contained in perfumes, deodorants, and other cosmetics.
Safety and hazards
Even though ethanol is very commonly used, it is a dangerous chemical. As ethanal is highly flammable, it has exact flash points which needs to be noticed. While ethanol is consumed when drinking alcoholic beverages, consuming ethanol alone can cause coma and death. Ethanol may also be a carcinogenic.
Exposure to ethanol can be in vapor form (breathing it in), skin/body contact or ingestion. All are serious and need to be managed appropriately to ensure more damage is not incurred while trying to attend to the exposure.
Common side effects of ethanol include: intoxication, low blood pressure (hypotension) with flushing, agitation, low blood sugar (hypoglycemia), nausea, vomiting and excessive urination.
 M. Galbe, G. Zacchi, A review of the production of ethanol from softwood, Applied microbiology and biotechnology, 59(2002) 618-28.
 J. Zaldivar, J. Nielsen, L. Olsson, Fuel ethanol production from lignocellulose: a challenge for metabolic engineering and process integration, Applied microbiology and biotechnology, 56(2001) 17-34.
 Y. Sun, J. Cheng, Hydrolysis of lignocellulosic materials for ethanol production: a review, Bioresource technology, 83(2002) 1-11.
 P.V. Harris, F. Xu, N.E. Kreel, C. Kang, S. Fukuyama, New enzyme insights drive advances in commercial ethanol production, Current opinion in chemical biology, 19(2014) 162-70.
 J. Goldemberg, Ethanol for a sustainable energy future, science, 315(2007) 808-10.
 C. Ibeto, A. Ofoefule, K. Agbo, A global overview of biomass potentials for bioethanol production: a renewable alternative fuel, Trends Appl Sci Res, 6(2011) 410e25.
Ethyl alcohol, also called ethanol, absolute alcohol, or grain alcohol, is a clear, colorless, flammable liquid with a pleasant odor. It is associated primarily with alcoholic beverages, but it has numerous uses in the chemical industry. The word alcohol is derived from the Arabic word al kuhul, which was a fine powder of the element antimony used as a cosmetic. In Medieval times, the word al kuhul came to be associated with the distilled products known as alcohols. The hydroxyl group, -OH, bonded to a carbon, characterizes alcohols. Ethyl is derived from the root of the two-carbon hydrocarbon ethane.
In the BP 2009, the term ‘alcohol’; used without other qualification refers to ethanol containing ≥99.5% v/v of C2H6O. The term‘alcohol’, without other qualification, refers to ethanol 95.1–96.9% v/v. Where other strengths are intended, the term ‘alcohol’ or ‘ethanol’is used, followed by the statement of the strength. In the PhEur 6.0, anhydrous ethanol contains not less than 99.5% v/v of C2H6O at 208℃. The term ethanol (96%) is used to describe the material containing water and 95.1–96.9% v/v of C2H6O at 208℃.
Ethyl alcohol is a colorless, volatile, flammable liquid with a sweet, fruity odor. The Odor Threshold is 0.1355 ppm.
Ethyl alcohol is a colorless flammable liquid with a typical lower alcohol odor and is miscible in water in all proportions. It is stable and hygroscopic. It is incompatible with strong oxidizing agents, peroxides, acids, acid chlorides, acid anhydrides, alkali metals, ammonia, and moisture. Ethyl alcohol forms explosive mixtures with air. Ethyl alcohol is the most common solvent used in aerosols, cosmetics, pharmaceuticals, alcoholic beverages, vinegar production, and in the chemical synthesis of a large variety of products in different industries. For instance, in the manufacture of plastics, lacquers, polishes, plasticizers, perfumes, adhesives, rubber accelerators, explosives, synthetic resins, nitrocellulose, inks, preservatives, and as a fuel.
Reported found in apple, apple aroma, apple essence, apple juice, bacon fat, banana, bean, beef fat, beef extract, blackberry, black currant, bread, brussels sprout, cabbage, carrot root, cauliflower, blue cheese, cheddar cheese, Swiss cheese, cocoa bean, cherry, coffee, cream, cucumber, alcoholic beverages and many other sources
Alcohol is produced naturally from the fermentation of sugars, and it is assumed that prehistoric humans consumed alcohol when eating fermented fruits. The earliest direct evidence of alcohol consumption dates from the Neolithic period 10,000 years ago and consists of stone jugs used for holding alcoholic beverages. Ancient records and art from Egypt, Babylon, Mesopotamia, and other early civilizations indicate the use of alcohol as a beverage, medicine, and ceremonial drink. Records also show that the intoxicating effects of alcohol were known for thousands of years b.c.e. Alcoholic drinks were stored in Egyptian burial tombs, and deities devoted to alcoholic beverages were worshiped by different civilizations. As the human population expanded, alcoholic drinks assumed a prominent role in different cultures; for example, numerous references are made to wine in the Bible. Ancient Islamic alchemists advanced the practice of alcohol production by using distillation techniques. Distilled alcohols began to appear in the Middle Ages and was used in many remedies and medicines. A common practice by alchemists in different regions was the preparation of special liquors and brews with healing power. Aqua vitae (water of life) could refer to brandy, gin, whiskey, wine, or another form of alcoholic depending on the geographic area.
One of the most prominent uses of ethyl alcohol is as a fuel additive and increasingly as a fuel itself. Ethyl alcohol is added to gasoline to increase its oxygen content and octane number. In the United States, the Environmental Protection Agency has mandated that oxygenated fuels be used in certain geographic areas to help meet air quality standards for carbon monoxide, especially in winter. A gasoline blended for this purpose may contain a few percent ethyl alcohol. Gasoline blended with ethyl alcohol is called gasohol. A typical gasohol may contain 90% gasoline and 10% ethanol. Gasohol reduces several common air pollutants including carbon monoxide, carbon dioxide, hydrocarbons, and benzene. Conversely, nitrogen oxides increase with gasohol.
Ethanol is used primarily as a solvent — animportant industrial solvent for resins, lacquers, pharmaceuticals, toilet preparations,and cleaning agents; in the production of rawmaterials for cosmetics, perfumes, drugs, andplasticizers; as an antifreeze; as an automotive fuel additive; and from ancient times, inmaking beverages. Its pathway to the bodysystem is mainly through the consumption ofbeverages. It is formed by the natural fermentation of corn, sugarcane, and other crops.
Suitable for use in the precipitation of nucleic acids.
Most ethyl alcohol is used in alcoholic beverages in suitable dilutions. Other uses are as solvent in laboratory and industry, in the manufacture of denatured alcohol, pharmaceuticals (rubbing Compounds, lotions, tonics, colognes), in perfumery, in organic synthesis. Octane booster in gasoline. Pharmaceutic aid (solvent).
alcohol (alcohol SD-40; alcohol SDA-40; ethanol; ethyl alcohol) is widely used in the cosmetic industry as an antiseptic as well as a solvent given its strong grease-dissolving abilities. It is often used in a variety of concentrations in skin toners for acne skin, aftershave lotions, perfumes, suntan lotions, and toilet waters. Alcohol dries the skin when used in high concentrations. It is manufactured through the fermentation of starch, sugar, and other carbohydrates.
ethyl alcohol (Etanol) is commonly known as rubbing alcohol. ethyl alcohol is ordinary alcohol and is used medicinally as a topical antiseptic, astringent, and anti-bacterial. At concentrations above 15 percent, it is also a broad-spectrum preservative against bacteria and fungi, and can boost the efficacy of other preservatives in a formulation. Cosmetic companies tend to use alcohol SD-40 in high-grade cosmetic manufacturing as they consider ethanol too strong and too drying for application on the skin. obtained from grain distillation, it can also be synthetically manufactured.
ChEBI: A primary alcohol that is ethane in which one of the hydrogens is substituted by a hydroxy group.
Ethanol is the most widely abused drug in the world.
There are more than 10 million alcoholics in the United
States alone. Excessive consumption of alcoholic beverages
has been linked to as many as half of all traffic accidents,
two-thirds of homicides, and three-fourths of
suicides, and it is a significant factor in other crimes, in
family problems, and in personal and industrial accidents.
The annual cost to the American economy has
been estimated to exceed $100 billion in lost productivity,
medical care, and property damage.
Alcoholism has been difficult to define because of its complex nature.A person is generally considered an alcoholic, however, when his or her lifestyle is dominated by the procurement and consumption of alcoholic beverages and when this behavior interferes with personal, professional, social, or family relations.
A light drinker generally is defined as one who consumes an average of one drink or less per day, usually with the evening meal; a moderate drinker is one who has approximately three drinks per day; and a heavy drinker is one who has five or more drinks per day (or in the case of binge drinkers, at least once per week with five or more drinks on each occasion).
Ethanol is manufactured by the controlled enzymatic fermentation of starch, sugar, or other carbohydrates. A fermented liquid is produced containing about 15% ethanol; ethanol 95% v/v is then obtained by fractional distillation. Ethanol may also be prepared by a number of synthetic methods.
A colorless volatile liquid alcohol. Ethanol occurs in intoxicating drinks, in which it is produced by fermentation of a sugar: C6H12O6 → 2C2H5OH + 2CO2 Yeast is used to cause the reaction. At about 15% alcohol concentration (by volume) the reaction stops because the yeast is killed. Higher concentrations of alcohol are produced by distillation. Apart from its use in drinks, alcohol is used as a solvent and to form ethanal. Formerly, the main source was by fermentation of molasses, but now catalytic hydration of ethene is used to manufacture industrial ethanol. See also methylated spirits.
Intravenous use of ethanol, while once widely employed to inhibit premature labor, is now of historical interest only. Ethanol inhibits oxytocin release from the pituitary and thus indirectly decreases myometrial contractility. Today, 2-adrenomimetics and magnesium sulfate have replaced ethanol for parenteral tocolysis.
There are several approaches to the production of ethanol; mainly ethanol is produced by fermentation.
Absolute alcohol;Alcohol aethylicus;Alcool;Avitoin;Banatol;B-tonin;Colfin;Desqyam-x;Duonale-e;Efatin;Equithesin;Hizeneck-d;Honkon-n;Kapsitrin;Keralyt;Levovinizol;Mikrozid;Neotizol;Panoxy;Papette;Piadarn;Polislerol;Protectaderm;Sicol;Sodaphilline;Softa man;Sotracarix;Verucid;Weingeist;Xeracin.
World Health Organization (WHO)
Ethanol has been used throughout recorded history both in a medicinal and a social context. It is currently included in pharmaceutical preparations either as an active or inactive ingredient. At pharmacologically active doses ethanol is both a powerful cerebral depressant and a drug of addiction. Its use in pharmaceutical preparations has been severely restricted in several countries and in 1986 the 39th World Health Assembly adopted a resolution to prohibit such use except when ethanol is an essential ingredient which cannot be replaced by an appropriate alternative.
Aroma threshold values
Detection: 8 to 900 ppb
It liberates hydrogen when it reacts withmetal; forms acetaldehyde (toxic, flammable)on catalytic vapor phase dehydrogenation;ethyl ether (flammable) on dehydration withH2SO4 or a heterogeneous catalyst such asalumina, silica, SnCl2, MnCl2, or CuSO4;.
Classified as a depressant drug. Though it is rapidly oxidized in the body and is therefore noncumulative, ingestion of even moderate amounts causes lowering of inhibitions, often succeeded by dizziness, headache, or nausea. Larger intake causes loss of m
The toxicity of ethanol is much lower thanthat of methanol or propanol. However, theliterature on the subject is vastly greater thanthat of any other alcohol. This is attributableessentially to its use in alcoholic beverages.There are exhaustive reviews on alcohol toxicity and free-radical mechanisms (Nordmannet al. 1987). The health hazard arises primarily from ingestion rather than inhalation. Ingestion of a large dose, 250–500 mL,can be fatal. It affects the central nervoussystem. Symptoms are excitation, intoxication, stupor, hypoglycemia, and coma — thelatter occurring at a blood alcohol contentof 300–400 0 mg/L. It is reported to have atoxic effect on the thyroid gland (Hegeduset al. 1988) and to have an acute hypotensiveaction, reducing the systolic blood pressurein humans (Eisenhofer et al. 1987). Chronicconsumption can cause cirrhosis of the liver.Inhalation of alcohol vapors can result inirritation of the eyes and mucous membranes.This may happen at a high concentrationof 5000–10,000 ppm. Exposure may resultin stupor, fatigue, and sleepiness. There isno report of cirrhosis occurring from inhalation. Chronic exposure to ethanol vapors hasproduced brain damage in mice. The neurotoxicity increases with thiamine deficiency(Phillips 1987). Both acute and chronic dosesof ethanol elevated the lipid peroxidation inrat brain. This was found to be elevated further by vitamin E deficiency, as well as itssupplementation (Nadiger et al. 1988).
pplementation (Nadiger et al. 1988).The toxicity of ethanol is enhanced in thepresence of compounds such as barbiturates,carbon monoxide, and methyl mercury. Withthe latter compound, ethanol enhanced theretention of mercury in the kidney of ratsand thus increased nephrotoxicity (McNeilet al. 1988). When combined with cocaineand fed to rats, increased maternal and fetaltoxicity was observed (Church et al. 1988).Ethanol is reported to be synergisticallytoxic with caffeine (Pollard 1988) andwith n-butanol and isoamyl alcohol. Priorethanol consumption increased the toxicity of acetaminophen in mice (Carter1987).
Flammability and Explosibility
Ethanol is a flammable liquid (NFPA rating = 3), and its vapor can travel a considerable distance to an ignition source and "flash back." Ethanol vapor forms explosive mixtures with air at concentrations of 4.3 to 19% (by volume). Hazardous gases produced in ethanol fires include carbon monoxide and carbon dioxide. Carbon dioxide or dry chemical extinguishers should be used for ethanol fires.
Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.
Ethanol and aqueous ethanol solutions of various concentrations are widely used in pharmaceutical formulations and cosmetics. Although ethanol is primarily used as a solvent, it is also employed as a disinfectant, and in solutions as an antimicrobial preservative. Topical ethanol solutions are used in the development of transdermal drug delivery systems as penetration enhancers. Ethanol has also been used in the development of transdermal preparations as a co-surfactant.
Ethanol is widely used for its solvent and antiseptic properties. It is rather an irritant and sensitization has rarely been reported.
Mechanism of action
A great deal of attention has been focused on a class of proteins termed the ligand-gated ion channels as being important to the mechanism of action of alcohol.These integral membrane proteins function as gates or pores that allow the passage of certain ions into and out of neurons upon binding of the appropriate neurotransmitter. This flux of ions largely determines the degree of neuronal activity. Two distinct types of ligand-gated ion channels are particularly sensitive to concentrations of alcohol that produce intoxication and sedation. These are the α-aminobutyric acid (GABA) chloride ionophore and the N-methyl-D-aspartate (NMDA) subtype of glutamate receptor. The GABA–chloride ion channel reduces neuronal activity by hyperpolarizing the neurons, while activation of the NMDA receptor causes neuronal depolarization or excitation. Alcohol has been shown to increase chloride flux through the GABAA receptor and reduce calcium flux through the NMDA receptor. These actions result in powerful suppression of nerve cell activity, which is consistent with the depressant actions of alcohol in the brain.
Generally, no treatment is required for acute ethanol intoxication.
Allowing the individual to sleep off the effects
of ethanol ingestion is the usual procedure.
Hangovers are treated similarly; that is, no effective
remedy exists for a hangover, except for controlling the
amount of ethanol consumed. Sometimes ethanol overdose
is a medical emergency. For example, prompt treatment
is required if the patient is in danger of dying of
respiratory arrest, is comatose, has dilated pupils, is hypothermic,
or displays tachycardia.
Treatment for severe ethanol overdose is generally supportive. Increased intracranial pressure can be relieved by intravenous administration of hypertonic mannitol. Hemodialysis can accelerate the removal of ethanol from the body. Stimulants of ethanol metabolism, such as fructose, are not sufficiently effective, and use of analeptics is not recommended because of the possibility of precipitating convulsions.
The immediate concern in the treatment of alcoholics is detoxification and management of the ethanol withdrawal syndrome. Another pharmacological approach is the use of anticraving drugs, for example serotonin uptake inhibitors,dopaminergic agonists, and opioid antagonists.The only treatment that has shown considerable promise is one that uses the opioid antagonist naltrexone.
Acute Ethanol Intoxication and Hangover
Ethanol intoxication is probably the best-known form of drug toxicity. Intoxicated individuals are a threat to themselves and others, particularly if they attempt to drive or operate machinery. Although death can result from ethanol overdose, usually the patient lapses into a coma before ingesting lethal quantities. Ethanol intoxication is sometimes mistakenly diagnosed as diabetic coma, schizophrenia, overdosage of other CNS depressant drugs, or skull fracture. An additional feature commonly associated with excessive ethanol consumption is difficulty in regulating body temperature. Hypothermia frequently results, with body temperature falling toward that of the ambient environment. This problem can be particularly severe in the elderly, who normally have difficulty regulating their body temperature.
One of the consequences of ethanol intoxication is the hangover, a condition characterized by headache, nausea, sweating, and tremor. Although unpleasant, a hangover is not dangerous, even though the person having one may feel otherwise.
Confirmed human carcinogen for ingestion of beverage alcohol. Experimental tumorigenic and teratogenic data. Moderately toxic to humans by ingestion. Moderately toxic experimentally by intravenous and intraperitoneal routes. Mildly toxic by inhalation and skin contact. Human systemic effects by ingestion and subcutaneous routes: sleep disorders, hallucinations, dtstorted perceptions, convulsions, motor activity changes, ataxia, coma, antipsychotic,headache, pulmonary changes, alteration in gastric secretion, nausea or vomiting, other gastrointestinal changes, menstrual cycle changes, and body temperature decrease. Can also cause glandular effects in humans. Human reproductive effects by ingestion, intravenous, and intrauterine routes: changes in female fertility index. Effects on newborn include: changes in Apgar score, neonatal measures or effects, and drug dependence. Experimental reproductive effects. Human mutation data reported. An eye and skin irritant. The systemic effect of ethanol differs from that of methanol. Ethanol is rapidly oxidtzed in the body to carbon dtoxide and water, and, in contrast to methanol, no cumulative effect occurs. Though ethanol possesses narcotic properties, concentrations sufficient to produce this effect are not reached in industry. Concentrations below 1000 pprn usually produce no signs of intoxication. Exposure to concentrations over 1000 pprn may cause headache, irritation of the eyes, nose, and throat, and, if continued for an hour, drowsiness and lassitude, loss of appetite, and inability to concentrate. There is no concrete evidence that repeated exposure to ethanol vapor results in cirrhosis of the liver. Ingestion of large doses can cause alcohol poisoning. Repeated ingestions can lead to alcoholism. It is a central nervous system depressant.Flammable liquid when exposed to heat or flame; can react vigorously with oxidizers. To fight fire, use alcohol foam, CO2, dry chemical. Explosive reaction with the oxidized coating around potassium metal. Ignites and then explodes on contact with acetic anhydride + sodum hydrogen sulfate. Reacts violently with acetyl bromide (evolves hydrogen bromide), dichloromethane + sulfuric acid + nitrate or nitrite, disulfuryl difluoride, tetrachlorosilane + water, and strong oxidants. Ignites on contact with disulfuric acid + nitric acid, phosphorus(IⅡ) oxide, platinum, potassium tert-butoxide + acids. Forms explosive products in reaction with ammonia + silver nitrate (forms silver nitride and silver fulminate), magnesium perchlorate (forms ethyl perchlorate), nitric acid + silver (forms silver fulminate), silver nitrate (forms ethyl nitrate), silverp) oxide + ammonia or hydrazine (forms silver nitride and silver fulminate), sodum (evolves hydrogen gas). Incompatible with acetyl chloride, BrF5, Ca(OCl)2, ClO3, Cr03, Cr(OCl)2, (cyanuric acid + H20), H202, HNO3, (H202 + H2SO4), (I + CH3OH + HgO), wn(ClO4)2 + 2,2-dimethoxy propane], Hg(NO3)2, HClO4, perchlorates, (H2SO4 + permanganates), HMn04, KO2, KOC(CH3)3, AgClO4, NaH3N2, uo2(clO4)2
Ethanol and aqueous ethanol solutions are widely used in a variety
of pharmaceutical formulations and cosmetics. It is also consumed
in alcoholic beverages.
Ethanol is rapidly absorbed from the gastrointestinal tract and the vapor may be absorbed through the lungs; it is metabolized, mainly in the liver, to acetaldehyde, which is further oxidized to acetate.
Ethanol is a central nervous system depressant and ingestion of low to moderate quantities can lead to symptoms of intoxication including muscle incoordination, visual impairment, slurred speech, etc. Ingestion of higher concentrations may cause depression of medullary action, lethargy, amnesia, hypothermia, hypoglycemia, stupor, coma, respiratory depression, and cardiovascular collapse. The lethal human blood-alcohol concentration is generally estimated to be 400–500 mg/100 mL.
Although symptoms of ethanol intoxication are usually encountered following deliberate consumption of ethanol-containing beverages, many pharmaceutical products contain ethanol as a solvent, which, if ingested in sufficiently large quantities, may cause adverse symptoms of intoxication. In the USA, the maximum quantity of alcohol included in OTC medicines is 10% v/v for products labeled for use by people of 12 years of age and older, 5% v/v for products intended for use by children aged 6–12 years of age, and 0.5% v/v for products for use by children under 6 years of age.
Parenteral products containing up to 50% of alcohol (ethanol 95 or 96% v/v) have been formulated. However, such concentrations can produce pain on intramuscular injection and lower concentrations such as 5–10% v/v are preferred. Subcutaneous injection of alcohol (ethanol 95% v/v) similarly causes considerable pain followed by anesthesia. If injections are made close to nerves, neuritis and nerve degeneration may occur. This effect is used therapeutically to cause anesthesia in cases of severe pain, although the practice of using alcohol in nerve blocks is controversial. Doses of 1mL of absolute alcohol have been used for this purpose.
Preparations containing more than 50% v/v alcohol may cause skin irritation when applied topically.
LD50 (mouse, IP): 0.93 g/kg
LD50 (mouse, IV): 1.97 g/kg
LD50 (mouse, oral): 3.45 g/kg
LD50 (mouse, SC): 8.29 g/kg
LD50 (rat, IP): 3.75 g/kg
LD50 (rat, IV): 1.44 g/kg
LD50 (rat, oral): 7.06 g/kg
Ethyl alcohol is used, topical antiinfective agent; solvent to make beverages; in the chemical synthesis of a wide variety of compounds, such as acetaldehyde, ethyl ether, ethyl chloride, and butadiene. It is a solvent or processing agent in the manufacture of pharmaceuticals; plastics, lacquers, polishes, plasticizers, perfumes, cosmetics, rubber accelerators; explosives, synthetic resins; nitrocellulose, adhesives, inks, and preservatives. It is also used as an antifreeze and as a fuel. It is an intermediate in the manufacture of many drugs and pesticides.
In 1987, the International Agency for Research on Cancer (IARC) evaluated the cancer data on ethanol and alcoholic beverages in humans and animals . The IARC concluded that there was inadequate evidence for the carcinogenicity of ethanol and of alcoholic beverages in experimental animals, but there was sufficient evidence for the carcinogenicity of alcoholic beverages in humans. The IARC classified alcoholic beverages as a Group 1 carcinogen based on the occurrence of malignant tumors of the oral cavity, pharynx, larynx, esophagus, and liver that have been causally related to the consumption of alcoholic beverages.
Ethyl alcohol should be protected from physical damage. It should be kept stored in a cool, dry, well-ventilated location, away from any area where the fi re hazard may be acute. Outside or detached storage is preferred. Separate from incompatibles. Containers should be bonded and grounded for transfer to avoid static sparks. The storage and use areas should be free from smoking areas.
UN1170 Ethyl alcohol or Ethanol or Ethanol solutions or Ethyl alcohol solutions, Hazard Class: 3; Labels: 3-Flammable liquid.
Usual impurities of fermentation alcohol are fusel oils (mainly higher alcohols, especially pentanols), aldehydes, esters, ketones and water. With synthetic alcohol, likely impurities are water, aldehydes, aliphatic esters, acetone and diethyl ether. Traces of *benzene are present in ethanol that has been dehydrated by azeotropic distillation with *benzene. Anhydrous ethanol is very hygroscopic. Water (down to 0.05%) can be detected by formation of a voluminous precipitate when aluminium ethoxide in *benzene is added to a test portion, Rectified spirit (95% ethanol) is converted to absolute (99.5%) ethanol by refluxing with freshly ignited CaO (250g/L) for 6hours, standing overnight and distilling with precautions to exclude moisture. Numerous methods are available for further drying of absolute ethanol for making “Super dry ethanol”. Lund and Bjerrum [Chem Ber 64 210 1931] used reaction with magnesium ethoxide, prepared by placing 5g of clean dry magnesium turnings and 0.5g of iodine (or a few drops of CCl4), to activate the Mg, in a 2L flask, followed by 50-75 mL of absolute ethanol, and warming the mixture until a vigorous reaction occurs. When this subsides, heating is continued until all the magnesium is converted to magnesium ethoxide. Up to 1L of ethanol is then added and, after an hour's reflux, it is distilled off. The water content should be below 0.05%. Walden, Ulich and Laun [Z Phys Chem 114 275 1925] used amalgamated aluminium chips, prepared by degreasing aluminium chips (by washing with Et2O and drying in a vacuum to remove grease from machining the Al), treating with alkali until hydrogen evolved vigorously, washing with H2O until the washings were weakly alkaline and then stirring with 1% HgCl2 solution. After 2minutes, the chips were washed quickly with H2O, then alcohol, then ether, and dried with filter paper. (The amalgam became warm.) These chips were added to the ethanol, which was then gently warmed for several hours until evolution of hydrogen ceased. The alcohol was distilled and aspirated for some time with pure dry air. Smith [J Chem Soc 1288 1927] reacted 1L of absolute ethanol in a 2L flask with 7g of clean dry sodium, and added 25g of pure ethyl succinate (27g of pure ethyl phthalate was an alternative), and refluxed the mixture for 2hours in a system protected from moisture, and then distilled the ethanol. A modification used 40g of ethyl formate instead, so that sodium formate separated out and, during reflux, the excess of ethyl formate decomposed to CO and ethanol. Drying agents suitable for use with ethanol include Linde type 4A molecular sieves, calcium metal, and CaH2. The calcium hydride (2g) is crushed to a powder and dissolved in 100mL absolute ethanol by gently boiling. About 70mL of the ethanol are distilled off to remove any dissolved gases before the remainder is poured into 1L of ca 99.9% ethanol in a still, where it is boiled under reflux for 20hours, while a slow stream of pure, dry hydrogen (better use nitrogen or Ar) is passed through. It is then distilled [Rüber Z Elektrochem 29 334 1923]. If calcium is used for drying, about ten times the theoretical amount should be used, and traces of ammonia (from some calcium nitride in the Ca metal) would be removed by passing dry air into the vapour during reflux. Ethanol can be freed from traces of basic materials by distillation from a little 2,4,6-trinitrobenzoic acid or sulfanilic acid. *Benzene can be removed by fractional distillation after adding a little water (the *benzene/water/ethanol azeotrope distils at 64.9o), the alcohol is then re-dried using one of the methods described above. Alternatively, careful fractional distillation can separate *benzene as the *benzene/ethanol azeotrope (b 68.2o). Aldehydes can be removed from ethanol by digesting with 8-10g of dissolved KOH and 5-10g of aluminium or zinc per L, followed by distillation. Another method is to heat under reflux with KOH (20g/L) and AgNO3 (10g/L) or to add 2.5-3g of lead acetate in 5mL of water to 1L of ethanol, followed (slowly and without stirring) by 5g of KOH in 25mL of ethanol: after 1hour the flask is shaken thoroughly, then set aside overnight before filtering and distilling. The residual water can be removed by standing the distillate over activated aluminium amalgam for 1 week, then filtering and distilling. Distillation of ethanol from Raney nickel eliminates catalyst poisons. Other purification procedures include pre-treatment with conc H2SO4 (3mL/L) to eliminate amines, and with KMnO4 to oxidise aldehydes, followed by refluxing with KOH to resinify aldehydes, and distilling to remove traces of H3PO4 and other acidic impurities after passage through silica gel, and drying over CaSO4. Water can be removed by azeotropic distillation with dichloromethane (azeotrope boils at 38.1o and contains 1.8% water) or 2,2,4-trimethylpentane. [Beilstein 1 IV 1289.] Rapid purification: Place degreased Mg turnings (grease from machining the turnings is removed by washing with dry EtOH then Et2O, and drying in a vacuum) (5g) in a dry 2L round bottomed flask fitted with a reflux condenser (protect from air with a drying tube filled with CaCl2 or KOH pellets) and flush with dry N2. Then add iodine crystals (0.5g) and gently warm the flask until iodine vapour is formed and coats the turnings. Cool, then add EtOH (50mL) and carefully heat to reflux until the iodine disappears. Cool again then add more EtOH (to 1L) and reflux under N2 for several hours. Distil and store over 3A molecular sieves (pre-heated at
In acidic conditions, ethanol solutions may react vigorously with oxidizing materials. Mixtures with alkali may darken in color owing to a reaction with residual amounts of aldehyde. Organic salts or acacia may be precipitated from aqueous solutions or dispersions. Ethanol solutions are also incompatible with aluminum containers and may interact with some drugs.
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.
During handling of ethyl alcohol, workers should use chemical-resistant shields, monogoggles, proper gloves, laboratory coat/apron, and protective equipment as required. Workers and the workplace should have adequate ventilation vent hoods, class b extinguisher. Workers should avoid sources of heat, sparks, or flames. Waste disposal and spill should be collected in suitable containers or absorbed on a suitable absorbent material for subsequent disposal. Waste material should be disposed of in an approved incinerator or in a designated landfi ll site, in compliance with all federal, provincial, and local government regulations.
Included in the FDA Inactive Ingredients Database (dental preparations; inhalations; IM, IV, and SC injections; nasal and ophthalmic preparations; oral capsules, solutions, suspensions, syrups, and tablets; rectal, topical, and transdermal preparations). Included in the Canadian List of Acceptable Non-medicinal Ingredients. Included in nonparenteral and parenteral medicines licensed in the UK.
Ethanol Preparation Products And Raw materials Raw materials
- 010-82848833- ;010-82848833-
64-17-5, EthanolRelated Search:
- ALCOHOL, SDA 3C
- ETHANOL ABSOLUTE DVH
- Absolute ethanol
- Alcare Hand Degermer
- Alcohol anhydrous
- Alcohol, dehydrated
- Alcohol, diluted
- Tecsol C
- USI in oval
- Alcohol absolute
- Ethyl alcohol 95%
- Edible ethanol
- ETHANOL REAGENT ANHYDROUS DENATURED
- ETHANOL, ABSOLUTE, DENAT. WITH 1% CYCLOH EXANE
- ETHANOL CONTROL-L
- ETHANOL ABSOLUT DENAT. 1% CYCLOHEXANE A
- ETHANOL 96 VOL.% EXTRA PURE
- ETHANOL, ACS, PH HELV, "F13 O"
- ETHANOL ABSOLUTE DENATURATED WITH MEK
- ETHANOL ABSOLUTE 200 PROOF FOR &
- ETHANOL, FOR HPLC, A15 O
- ETHANOL, PH HELV, 'F15 O'
- ETHANOL, ACS, FOR UV-SPECTROSCOPY,
- ETHANOL ABSOLUTE 200 PROOF 99.5% A.&
- ETHANOL SEMICONDUCTOR GRADE MOS PURANAL<TM> FOR EXPORT
- ETHANOL G CHROMASOLV<TM>
- TOYOPEARL ETHER-650M, 100ML
- ETHANOL, 190 PROOF, FOR MOLECULAR &
- ETHANOL DENATURED REAGENT GRADE
- ETHANOL, PH EUR
- ETHANOL, DENAT.WITH 1% DIETHYL PHTHALATE 'F15 P'
- ETHANOL, FOR RESIDUE ANALYSIS
- ETHANOL SOLUTION, PH HELV,70 % IN WATER (V/V)
- ETHANOL, 'F25 O'
- ETHANOL, DENAT. WITH 1% CYCLOHEXANE
- ETHANOL, PH EUR, ANHYDROUS
- Ethanol absolute semiconductor grade puranal for Export (honeywell 17833)
- ETHANOL, STANDARD FOR GC
- ETHANOL, DENATURATED WITH 4.8% ISO-PROPA NOL 'A15ISO'
- ETHANOL, 1X1ML, MEOH, 2000UG/ML