ChemicalBook > CAS DataBase List > PHENOL-FORMALDEHYDE RESIN

PHENOL-FORMALDEHYDE RESIN

Product Name:
PHENOL-FORMALDEHYDE RESIN
CAS No.
9003-35-4
Chemical Name:
PHENOL-FORMALDEHYDE RESIN
CBNumber:
CB8274689
Molecular Formula:
C7H6O2
Formula Weight:
122.12134
MOL File:
9003-35-4.mol
More
Less

PHENOL-FORMALDEHYDE RESIN Property

Melting point:
94 °C
Density 
1.10 g/cm3
Stability:
Stable. Incompatible with strong oxidizing agents.
EPA Substance Registry System
Formaldehyde phenol polymer (9003-35-4)
More
Less

PHENOL-FORMALDEHYDE RESIN Chemical Properties,Usage,Production

Preparation

Phenol-formaldehyde resin is prepared as follows:
C6H5OH+H2C=O ---> [-C6H2(OH)CH2-]n
One-Stage Resins. The ratio of formaldehyde to phenol is high enough to allow the thermosetting process to take place without the addition of other sources of cross-links.
Two-Stage Resins. The ratio of formaldehyde to phenol is low enough to prevent the thermosetting reaction from occurring during manufacture of the resin. At this point the resin is termed novolac resin. Subsequently, hexamethylenetetramine is incorporated into the material to act as a source of chemical cross-links during the molding operation (and conversion to the thermoset or cured state).

Industrial uses

Phenolic resins are used for low-cost partsrequiring good electrical insulating properties,heat resistance, or chemical resistance. Theaverage shelf life of this resin is about 1 monthat 21.1°C. This can be extended by storing it ina refrigerator at 1.6 to 10°C. Varying the catalyst(according to the thickness of the cast) andraising the cure temperature to 93°C will alterthe cure time from as long as 8 h to as short as15 min.
Some shrinkage occurs in the finished casting(0.012 to 0.6 mm/mm), depending on thequantity of filler, amount of catalyst, and therate of cure. Faster cure cycles produce a higherrate of shrinkage. Since the cure cycle can beaccelerated, phenolics are used in short-runcasting operations.
Cast phenolic parts are easily removed fromthe mold if the parting agents recommended bythe supplier are used. Posteuring improves thebasic properties of the finished casting.

Industrial uses

Phenol-formaldehyde resin is a synthetic resin, commonly known as phenolic, made by the reaction of phenol and formaldehyde, and employed as a molding material for the making of mechanical and electrical parts. The resins are also used for laminating, coatings, and casting resins.
Phenolic resins are used most extensively as thermosetting plastic materials, as there are only a few uses as thermoplastics. The polymer is composed of carbon, hydrogen, oxygen, and sometimes nitrogen. Its molecular weight varies from a very low value during its early state of formation to almost infinity in its final state of cure. The chemical configuration, in the thermoset state, is usually represented by a threedimensional network in which the phenolic nuclei are linked by methylene groups. The completely cross-linked network requires three methylene groups to two phenolic groups. A lesser degree of cross-linking is attainable either by varying the proportions of the ingredients or by blocking some of the reactive positions of the phenolic nucleus by other groups, such as methyl, butyl, etc. Reactivity can be enhanced by increasing the hydroxyl groups on the phenolic nuclei, for example, by the use of resorcinol.
The outstanding characteristics of phenolics are good electrical properties, very rigid set, good tensile strength, excellent heat resistance, good rigidity at elevated temperature, good aging properties; also, good resistance to water, organic solvents, weak bases, and weak acids. All these characteristics are coupled with relatively low cost.

Less

PHENOL-FORMALDEHYDE RESIN Suppliers

Global(130)Suppliers
Shandong Yonghui New Material Co. LTD
Tel:
0533-8796697
Email:
13853372908@139.com
Country:
CHINA
ProdList:
1
Advantage:
58
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel:
21-61259100-
Fax:
86-21-61259102
Email:
sh@meryer.com
Country:
China
ProdList:
40268
Advantage:
62
Aemon Chemical
Tel:
0086-755-86198205
Email:
acinfo@aemonchem.com
Country:
China
ProdList:
1945
Advantage:
57
Chengdu Ai Keda Chemical Technology Co., Ltd.
Tel:
028-85911938-
Fax:
028-86757656
Email:
800078821@qq.com
Country:
China
ProdList:
9754
Advantage:
55
Shanghai T&W Pharmaceutical Co., Ltd.
Tel:
+86 21 61551611
Fax:
+86 21 50676805
Email:
contact@trustwe.com
Country:
China
ProdList:
9917
Advantage:
58
Cheng Du Micxy Chemical Co.,Ltd
Tel:
028-85632863-
Fax:
028-85632863
Email:
sales@micxy.com;
Country:
China
ProdList:
13070
Advantage:
58
The future of Shanghai Industrial Co., Ltd.
Tel:
021-61552785
Fax:
021-55660885
Email:
sales@shshiji.com
Country:
China
ProdList:
9543
Advantage:
55
Jiaxing Trustworthy Import And Export Co., Ltd.
Tel:
+86 (573) 8203-0555
Email:
jessica@chinatrustworthy.com
Country:
China
ProdList:
38
Advantage:
56
Zouping Mingxing Chemical Co.,Ltd.
Tel:
13605431940
Fax:
0086-0543-2240079
Email:
zpmxchemical@126.com
Country:
China
ProdList:
2408
Advantage:
62

9003-35-4, PHENOL-FORMALDEHYDE RESINRelated Search:

Phenolic epoxy resin Urea formaldehyde Phenolic resin varnish A-stage phenolic resin phenolic resin anodic electrophoretic paint (II) sulfonated ligno-sulfomethylated phenolic resin copolymer Polyterpene phenolic resin sulfonated phenolic resin SCREW CAPS 18-400 PHENOLIC RESIN WITH& Phenolic Resin 201 Rosin modified phenol-formaldehyde resin,tung oil,glycerin,phthalic anhydride resin,Rosin modified phenol-formaldehyde resin, tung oil, glycerin, phthalic anhydride resin phenolic resin adhesive 2123 Rosin Modified Phenolic Resin Anticorrosive phenolic resin powder coating SCREW CAPS 24-430 PHENOLIC RESIN WITH& Aluminium powder phenolic resin enamel Rosin Modified Phenolic Resin 2118 p-tert-Octylphenol, phenol, formaldehyde resin
  • Phenol-formaldehydepolymer
  • phenol-formaldehyderesins
  • Formaldehyde,phenol polymer
  • Novolac
  • Paraformaldehyde, phenol polymer
  • Paraformaldehyde,formaldehyde,phenol polymer
  • P-F-R-2
  • Phenol Formaldehyde Resin,Novolac
  • Phenol Formaldehyde Resin,Resol
  • PHENOLIC MODIFIED ROSIN ESTER
  • Phenolphormaldehydresin2123
  • PF resins
  • Phenolic resins
  • PHENOL-FORMRESIN
  • ACID-CATALYZEDPHENOLFORMALDEHYDERESIN
  • PHENOL-FORMALDEHYDERESIN-2
  • PHENOLFORMALDEHYDERESIN,ACID-CATALYZED
  • PHENOLFORMALDEHYDEPOLYMERS
  • FORMALDEHYDE-PHENOLRESINS
  • PHENOLFORMALDEHYDERESIN,ALKALICATALYZED
  • ACID-CATALYSEDPHENOLFORMALDEHYDERESIN
  • Phenol-Formaldehyd-Kondensationsprodukt
  • Resins, phenolic
  • Resins, phenol/formaldehyde
  • Phenolpac
  • phenolic microballoons
  • Phenolic moulding plastics PF2C5-631
  • Phenolic moulding plastics PF2C3-431
  • Phenolic moulding plastics PF2E4-2304
  • Phenolic moulding plastics PF2A2-141
  • Phenolic resin 2130
  • Phenolic resin 3201
  • Phenolic resin,rosin modified 212
  • Phenolic moulding plastics PF2S1-931
  • Phenolic casting resin
  • Phenolic soya bean oil resin
  • Phenolic moulding powder D141
  • Phenolic resin 665
  • Phenolic resin,PET modified
  • Phenolic moulding plastics PF2A2-161J
  • Phenolic moulding plastics SP1191
  • Phenolic moulding plastics PF2A2-151
  • Phenolic resin 401
  • Phenolic resin,rosin modified 210
  • Phenolic moulding plastics PF2S1-5802
  • Phenolic moulding plastics PF2S1-441
  • Phenolic moulding plastics PF1A2-1501
  • Phenolic resin,self-hardening
  • Phenolic resin 2183
  • Phenolic resin FFD-384
  • Phenolic resin,rosin modified 2116
  • Water-soluble phenolic resin adhesive
  • Sulfomethyl-phenolic resin
  • Phenolie resin FFD-302
  • Phenolic granular injection moulding plastics SP6740
  • Formaldehyde·phenol polycondensate
  • Formaldehyde-phenol copolymer
  • Formaldehyde - phenol (1:1)