Sulfamic acid Chemical Properties
- Melting point:
- 215-225 °C (dec.) (lit.)
- Boiling point:
- -520.47°C (estimate)
- 2.151 g/cm3 at 25 °C
- refractive index
- storage temp.
- Store below +30°C.
- water: soluble213g/L at 20°C
- Crystals or Crystalline Powder
- 1.2 (10g/l, H2O)
- Water Solubility
- 146.8 g/L (20 ºC)
- CAS DataBase Reference
- 5329-14-6(CAS DataBase Reference)
- NIST Chemistry Reference
- Sulfamic acid(5329-14-6)
- EPA Substance Registry System
- Sulfamic acid (5329-14-6)
Sulfamic acid Usage And Synthesis
Sulfamic acid is a white crystalline solid.
It is used in acidimetric standard.
As standard in alkalimetry; in acid cleaning; in nitrite removal; in chlorine stabilization for use in swimming pools, cooling towers, paper mills. Solid-acid catalyst in organic synthesis. The acid or its ammonium salt has been recommended for flameproofing fabrics and wood. Metal salts are used in electroplating. Ammonium sulfamate, q.v., is also widely used as a weed killer.
ChEBI: The simplest of the sulfamic acids consisting of a single sulfur atom covalently bound by single bonds to hydroxy and amino groups and by double bonds to two oxygen atoms.
sulphamic acid: A colourless crystalline solid, NH2SO2OH, which is extremely soluble in water and normally exists as the zwitterion H3N+.SO3–. It is a strong acid, readily forming sulphamate salts. It is used in electroplating, hard-water scale reremovers, herbicides, and artificial sweeteners.
A white crystalline solid. Density 2.1 g / cm3. Melting point 205°C. Combustible. Irritates skin, eyes, and mucous membranes. Low toxicity. Used to make dyes and other chemicals.
Air & Water Reactions
Moderately soluble in water [Hawley].
Sulfamic acid reacts exothermically with bases. Aqueous solutions are acidic and corrosive.
Toxic by ingestion.
TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.
Poison by intraperitoneal route. Moderately toxic by ingestion. A human skin irritant. A corrosive irritant to skin, eyes, and mucous membranes. A substance that migrates to food from packaging materials. Violent or explosive reactions with chlorine, metal nitrates + heat, metal nitrites + heat, fuming HNO3. When heated to decomposition it emits very toxic fumes of SOx and NOx. See also SULFONATES.
Sulfamic acid is used in metal and ceramic cleaning, bleaching paper pulp; and textiles metal; in acid cleaning; as a stabilizing agent for chlorine and hypochlorite in swimming pools; cooling towers; and paper mills.
UN2967 Sulfamic acid, Hazard class: 8; Labels: 8-Corrosive material.
Crystallise NH2SO3H from water at 70o (300mL per 25g), after filtering, by cooling a little and discarding the first batch of crystals (about 2.5g) before standing in an ice-salt mixture for 20minutes. The crystals are filtered off by suction, washed with a small quantity of ice cold water, then twice with cold EtOH and finally with Et2O. Dry it in air for 1hour, then store it in a desiccator over Mg(ClO4)2 [Butler et al. Ind Eng Chem (Anal Ed) 10 690 1938]. For the preparation of primary standard material see Pure Appl Chem 25 459 1969.
The aqueous solution is a strong acid. Reacts violently with strong acids (especially fuming nitric acid), bases, chlorine. Reacts slowly with water, forming ammonium bisulfate. Incompatible with ammonia, amines, isocyanates, alkylene oxides; epichlorohydrin, oxidizers.
Sulfamic acid Preparation Products And Raw materials
- Sulfamic acid cobalt(II) salt,Bis(sulfamic acid) cobalt(II) salt
- D-GLUCOSAMINE-2,3-DISULFATE, DISODIUM SALT
- AZOBENZENEPHENYLHYDRAZINE SULFONIC ACID
- Sulfamic acid iron(II) salt
- Glucosamine sulfate
- Nickel bis(sulphamidate)
- Metanilic acid
- Ascoric Acid
- Hyaluronic acid
- 4-Amino-benzenesulfonic acid monosodium salt
- Sulfanilic acid
- Sulfamic acid monosodium salt
- Sodium N-cyclohexylsulfamate
- Sulfamic acid anion,Sulfamic acid ion
- Ethyl 2-(Chlorosulfonyl)acetate
- Folic acid
- Sulfamic acid
Sulfamic acid SupplierMore
- 400-620-6333 021-20337333-801
- 13801626616 021-51098368-807
- 13853380763 0533-15053312575