HMDA is a hygroscopic, colorless solid (pel-letsorflakes). Weak, fishy odor. odor thresh-old = 0.004 mg/m';Molecular weight = 116.13; Boilingpoint = 199℃; FreezingMelting point = 39- 42℃; Flashpoint= 71℃;81℃(solution);Autoi gnitiontemperature = 310℃. Explosive limits:LEL=0.7%;UEL= 6.3%. Soluble in water.
Hexamethylenediamine(HMDA) is a strong organic base, e.g., a 10 % aqueous solution has a pH of 12.3 (20°C), and forms stable salts with both organic and inorganic acids. The most important salt is that produced by neutralization with adipic acid (salt strike): the so-called nylon salt or AH salt. This compound is the raw material for the preparation of nylon by thermal dehydration under vacuum.
Hexamethylenediamine is a colorless solid with a typical fishlike amine odor. It is very soluble in water, soluble in alcohols and aromatic solvents, and poorly soluble in aliphatic hydrocarbons.
Hexamethylenediamine is mainly used as a monomer to make nylon 6-6. Its derivative hexamethylene diisocyanate (HDI) is used in the production of polyurethane. It acts as a cross-linking agent in epoxy resins. Other applications include fiber, plastics, polyurethane coatings, lubricants, water treatment products and specialty chemicals (biocides, petroleum additives, and phenol purification).
Hexamethylenediamine (1,6-hexanediamine, HDA ) may be used in the preparation of the following:
polyamides and their hydrolytic and fungal degradability was investigated
mullite ceramics
methoxycarbonylation of 1,6-hexanediamine with dimethyl carbonate to form dimethylhexane-1,6-dicarbamate.
Formation of high polymers, e.g., nylon 66.
dialkyl hexamethylene-1,6-dicarbamate (AHDC), via trans-esterification reaction of HDA and alkyl carbamates (AC) using FeCl3 as catalyst.
1,6-hexanediamine modified magnetic chitosan microspheres for fast and efficient removal of toxic hexavalent chromium.
ChEBI: Hexamethylenediamine is a C6 alkane-alpha,omega-diamine. It has a role as a human xenobiotic metabolite. It derives from a hydride of a hexane.
Virtually all hexamethylenediamine is now produced by the catalytic hydrogenation of adiponitrile[111-69-3] :
NC(CH2)4CN + 4H2 → H2N(CH2)6NH2.
Other reactions of hexamethylenediamine are typical of aliphatic amines (→ Amines, Aliphatic). The preparation of hexamethylene diisocyanate [822-06-0] by reaction with phosgene is industrially important:
H2N(CH2)6NH2+ 2COCl2 → OCN(CH2)6NCO + 4 HCl
The reaction takes place in a chlorinated aromatic solvent with a yield of 95% or more. Hexamethylene diisocyanate can also be produced by converting hexamethylenediamine to an aliphatic urethane, followed by thermal cleavage (→ Isocyanates, Organic).
Hexamethylenediamine, solution appears as a clear colorless liquid. Burns although some effort is required to ignite. Soluble in water. Corrosive to metals and tissue. Produces toxic oxides of nitrogen during combustion. Used to make nylon.
HEXAMETHYLENEDIAMINE is hygroscopic. Can react with strong oxidizing materials. Incompatible with acids, acid chlorides and acid anhydrides. Also incompatible with ketones, aldehydes, nitrates, phenols, isocyanates, monomers and chlorinated compounds .
TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.
Flammability and Explosibility
Non flammable
Hexamethylenediamine is used with adipic acid in the
synthesis of polyamide plastics.
HMDA is used as a textile intermedi ate; a raw material for nylon fiber and plastics; in wet
strength resins; in the manufacture of oil-modified and
moisture-area types of urethane coatings; in the manufac ture of polyamides for printing inks, dimer acids, and tex tiles; and as an oil and lubricant additive (probably as a
corrosion inhibitor); as boiler feed water additives; also
used in paints and as a curing agent for epoxy resins; mak ing adhesives.
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek med-ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medi-cal attention. If convulsions are not present, give a glass ortwo of water or milk to dilute the substance. Do not inducevomiting. Assure that the person's airway is unobstructedand contact a hospital or poison center immediately foradvice on whether or not to inducevomiting. Medicalobservation is recommended for 24- -48 h after breathingoverexposure, as pulmonary edema may be delayed. As firstaid for pulmonary edema, a doctor or authorized paramedicmay consider administering a corticosteroid spray.
(1) Color Code- White: Corrosive or ContactHazard; Store separately in a corrosion-resistant location.(2) Color Code- -Yellow Stripe (strong reducing agent):Reactivity Hazard; Store separately in an area isolated fromflammables, combustibles, or other yellow-coded materials.Store under nitrogen. Prior to working with this chemicalyou should be trained on its proper handling and storage.Before entering confined space where this chemical may bepresent, check to make sure that an ex plosive concentrationdoes not exist. Store in a cool, dry place away from oxidi-zers, strong acids, acid chlorides, acid anhydrides, carbondioxide, and metals. Preferably store under an inert atmo-sphere in a tightly closed container.
UN2280 Hexamethylenediamine, solid, Hazard
class: 8; Labels: 8-Corrosive material. UN1783
Hexamethylenediamine, solution, Hazard class: 8; Labels:
8-Corrosive material.
Crystallise it in a stream of nitrogen. It sublimes in a vacuum. [Beilstein 4 IV 1320.]
May form explosive mixture with air. The
aqueous solution is a strong base and a strong reducing agent.
Reacts violently with oxidizers, acids, acid chlorides; acid
anhydrides; carbon dioxide acids. Reacts on contact with
water forming carbon dioxide. Polymermizes in temperatures
>195℃.Reacts with ethylene dichloride, organic anhy drides, isocyanates, vinyl acetate, acrylates, substituted allyls,
alkylene oxides, epichlorohydrin, ketones, aldehydes, alco hols, glycols, phenols, cresols, caprolactum solution. Attacks
aluminum, copper, lead, tin, zinc and alloys. Absorbs carbon
dioxide and water from air. Store under Nitrogen.
Incineration; incinerator
equipped with a scrubber or thermal unit to reduce nitrogen oxides emissions.
