Sodium hydrosulfide Chemical Properties
- Melting point:
- 1,79 g/cm3
- Flash point:
- Water Solubility
- 620 g/L (20 ºC)
- Moisture Sensitive & Hygroscopic
- Stable, but hygroscopic. Flammable solid. May ignite in air.
- CAS DataBase Reference
- 16721-80-5(CAS DataBase Reference)
- EPA Substance Registry System
- Sodium hydrosulfide (16721-80-5)
Sodium hydrosulfide Usage And Synthesis
white crystals or powder with a very unpleasant smell
the copper ore beneficiation,the sulfurous acid dyeing of manmade fibre,the synthesis of organic intermediates,the preparation of auxiliary agent of sulfur dyes,and waste water treatment; raw material to produce ammonium sulphate and ethanethiol
Sodium hydrosulfide is a colorless to light yellow crystalline solid or fused mass. Sodium hydrosulfide is corrosive to skin and metal. Used in paper pulping, manufacturing dyes, and dehairing hides.
Air & Water Reactions
Soluble in water. The solution slowly evolves hydrogen sulfide gas. Crystals hydrolyze in moist air to sodium hydroxide and sodium sulfide. Liable to spontaneous heating in moist air.
A chemical base. Reacts with acids to release flammable and toxic gaseous hydrogen sulfide. As long as the solution is kept strongly alkaline, pH > 10, there is very little release of H2S. At pH = 7, the percent concentration of H2S released is close to 80%.
Contact with acids causes evolution of toxic gases.
Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.
Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.
Sodium hydrosulfide (NaHS) is stable only in solution. When in contact with oxygen
(air), it slowly oxidizes. If a solution of NaHS is heated, it is converted into Na2S and H2S.
Sodium hydrosulfide can be used as a replacement for Na2S·9H2O during sulfidization of oxide minerals. Sodium hydrosulfide in solution has a much lower alkalinity than Na2S.
Although the performance of NaHS is not the same as for Na2S, it is used because of its cost-effectiveness.
Poison by intraperitoneal and subcutaneous routes. Mutation data reported. A corrosive irritant to skin, eyes, and mucous membranes. Flammable when exposed to heat or flame. Spontaneous combustion. Reacts violently with Qazonium salts. Readily yields HS. When heated to decomposition it emits toxic fumes of SO, and NazO. See also SULFIDES and MERCAPTANS.
Sodium hydrosulfide Preparation Products And Raw materials
- Sodium dimethyldithiocarbamate
- SODIUM PYRROLIDINODITHIOCARBAMATE
- MORPHOLINE-4-CARBODITHIOIC ACID ANION SODIUM SALT
- SODIUM TETRASULFIDE
- 1-METHYL-5-MERCAPTOTETRAZOLE, SODIUM SALT
- SODIUM 1-PROPANETHIOLATE
- 1-PYRROLIDINEDITHIOCARBONIC ACID SODIUM SALT
- Sodium sulfide
- SODIUM 2-METHYL-2-PROPANETHIOLATE
- Sodium hydrosulfide
- Sodium bicarbonate
- Trisodium phosphate
- Diclofenac sodium
- Sodium benzoate
- Sodium borohydride
- Sodium chloride
- Sodium hydride
- 400-666-7788 010-82848833-